🎉5th Anniversary Flash Sale 🎉
Celebrate with us and save big today only! Use code:
ANNI5
AuraPrint™ — Cast Your Family's Hands Into a Sculpture That Outlives the Camera Roll
AuraPrint™ — Cast Your Family's Hands Into a Sculpture That Outlives the Camera Roll
Almost Gone — Order Before It’s Sold Out
Couldn't load pickup availability
Cast Their Hand Now — While It's Still This Small
AuraPrint™ is the 3D hand-casting kit that pulls a full plaster sculpture of your child's, partner's, or parent's hand out of a bucket in one sitting. Every knuckle, every fingernail, every little curl of the thumb — locked in, ready to sit on your shelf for the next forty years. Open the box, mix two packets, and forty-eight hours later you're holding the exact hand you didn't want to forget.
Stop Letting These Small Hands Slip Through the Camera Roll
Your phone has 4,000 photos of your kid and not one thing you can hold. Flat handprint kits crack the second they dry. Painted-canvas impressions smear into a blob. Most parents end up with a junk drawer full of half-finished attempts and nothing on the mantel. AuraPrint™ is built so the people who messed up every other kit still get a sculpture they'd give to their grandmother.
➤ Captures Every Knuckle Crease and Fingernail: The molding powder wraps tight around the hand and sets in 2–5 minutes — picking up detail no flat plaster press can record, down to the lines on a baby's palm.
➤ Everything Goes in One Box: Molding powder, casting stone, a 12cm mixing bucket, nitrile gloves, two wooden sticks, and a sanding disc. No mid-project trip to the craft store.
➤ Built for Squirmy Hands: Skin-safe, non-toxic, and fast enough to work on a 1-year-old who won't sit still, an impatient husband, or two hands holding each other on an anniversary.
How AuraPrint™ Pulls a 3D Sculpture Out of a Bucket
Two materials, two stages. First, you mix the Step 1 molding powder with lukewarm water in the included bucket — it sets to a soft rubbery cast around your hand in 2–5 minutes, recording every line. Pull your hand out and you've got a hollow negative mold of the exact pose you held.
Stage two: mix the Step 2 casting stone with water, pour it straight into the cavity, and walk away overnight. In the morning, peel the rubbery mold off and you're holding a solid plaster hand — same knuckles, same nails, same chubby baby thumb. Sand the rough edges with the included disc and put it on the shelf.
Why First-Birthday Parents and Anniversary Couples Keep Coming Back
Most people ordering AuraPrint™ have already bought a kit that didn't work. They're skeptical. Then they peel the mold away and message us at 11pm. "I was sure my 1-year-old wouldn't sit still long enough. He didn't. The mold set faster than he could wiggle and every wrinkle came out perfect. I cried." — Hannah K. First birthdays, anniversaries, grandparents who want to keep their grandchild's hand the way it is right now. Two hands clasped together for a wedding. One small hand inside a big one for Father's Day.
Hold the Moment You Didn't Want to Forget
✓ A Keepsake That Survives Your Cloud Storage: Long after the photo subscription expires and the phone breaks, this sculpture is still on your shelf catching light.
✓ Something Grandparents Actually Cry Over: Skip the framed photo. Hand them a 3D cast of their grandchild's hand and watch the face.
✓ Paintable If You Want, Beautiful If You Don't: Leave the plaster raw for a minimalist look, or bronze it, gold-leaf it, or color-match it to your shelf with acrylics.
How AuraPrint™ Works — 3 Steps, One Sitting
Step 1: Mix the Step 1 molding powder with lukewarm water in the bucket using the wooden stick. Slide the hand (or two hands) in, hold the pose, and wait 2–5 minutes for it to set firm around the fingers.
Step 2: Gently pull the hand out — you now have a clean negative mold. Mix the Step 2 casting stone with water and pour it straight into the cavity until full.
Step 3: Let it cure overnight. In the morning, peel the rubbery mold away, sand any rough edges with the included disc, and your 3D plaster sculpture is ready to display.
| AuraPrint™ 3D Kit | Flat Handprint Plaster Kits | Commissioning a Sculptor |
|---|---|---|
| Full 3D sculpture with raised fingers, knuckles, nails | Flat impression only, cracks as it dries | 3D sculpture, hand-sculpted — but at studio prices |
| Mold sets in 2–5 min — works on wiggly toddlers | Hand has to stay perfectly still while plaster sets | Multiple studio visits, scheduling required |
| Everything in one box, ready to use tonight | Extra materials usually needed | Weeks of turnaround, often $300+ |
What's Inside the Box
- Materials: Step 1 molding powder packet (17.5 × 13 cm) + Step 2 casting stone packet — non-toxic, hypoallergenic, skin-safe, quick-setting
- Mixing bucket: 12 cm tall × 13 cm wide at top, 10.2 cm at base — sized to hold an adult or child's hand comfortably
- Tools included: Nitrile gloves (24 × 10.5 cm), one wooden mixing/detail stick (7.5 × 0.4 cm), one sanding disc (4.9 × 0.9 cm)
- Box size: 13.5 × 13.5 × 13.5 cm — compact enough to gift-wrap without a second box
- Best for: Single adult hands, single child hands, or two small hands clasped (couples, parent-and-child, siblings)
Got Questions? Here's What You Need to Know
Will it work on a baby or toddler who won't sit still?
Yes. The molding powder sets in 2–5 minutes — usually faster than a toddler can lose patience. Read them a book, hum a song, and it's done before the wiggling starts.
What if my first try doesn't come out right?
Most kits give you enough material for one cast. If you want a backup attempt, order two kits — most people who care about getting it right do, especially for first-birthday casts.
Is the molding powder safe for sensitive skin?
Yes. Non-toxic, hypoallergenic, and skin-safe — it's the same family of material used in dental impression molds, designed to sit against skin without irritation.
How long until I can display the finished sculpture?
Mold and cast in one afternoon, leave overnight to cure, peel and sand in the morning. Roughly 12–18 hours from start to shelf-ready.
Can I paint or decorate the sculpture after?
Yes. Acrylic paint, gold leaf, bronze rub-on, or a clear sealer all work. Plenty of customers paint theirs to match a nursery shelf or color-match a wedding palette.
If Your Sculpture Doesn't Come Out Like the One You Saw — We Make It Right
If your AuraPrint™ cast doesn't capture the detail we promise, send us a photo and we'll send a replacement kit free of charge — or refund every cent. We'd rather you get the sculpture you actually wanted than keep your money. Cast the hand now while it's still this small. You won't get the chance again.
Hot Sale Items
-
50PCS Wedding Program Fans/ Rustic Minimalist Outdoor Wedding / DIY Wedding Program Fans
Regular price From $139.62 USDRegular priceUnit price per -
5 pcs 6.5ft Seeded Eucalyptus Garland with White Flowers for Party Wedding Table Decor
Regular price From $132.66 USDRegular priceUnit price per$164.50 USDSale price From $132.66 USDSale -
Outdoor String Lights 800LED/330FT with Remote for Wedding and Christmas
Regular price $99.92 USDRegular priceUnit price per$124.98 USDSale price $99.92 USDSale -
24 Pack Waterproof Flameless Floating Tealights, LED Tealights Candles / Wedding Reception, Party, Centerpiece, Pool & SPA
Regular price $48.96 USDRegular priceUnit price per$68.98 USDSale price $48.96 USDSale
Why should you buy from us?
Experience worry-free shopping! For over 8 years, we’ve been providing top-quality products, unique finds, and outstanding service to thousands of satisfied customers. Every purchase is protected by our satisfaction guarantee, and our 24/7 support team is ready to assist you — start your effortless shopping today!
